No need for costly extras or modifications! The standard HLB 50 packaged water chiller is designed to be plumbed directly from the open water tank straight into the chiller suction inlet – and you’re ready to go!
They are manufacturers of beverage pythons and tubing products including tap and trace cooling assemblies and a range of ancillary products for the beverage industry worldwide.
Replace the inefficient cooling system with a packaged water chiller.
Nexus delivered a 50Kw HL-B 50 packaged water chiller to cool the existing tank that supplies chilled water to the extruders.
Nexus supplied one off HL-B 50 Packaged water chiller (50Kw Chiller) to cool the existing tank. Chilled water is supplied by the customers pump to the Polymer extruder lines with vacuum sizing tanks, which produce polyethylene beverage tubing. The HL-B 50 packaged water chiller is piped directly from the open tank to the suction of the chiller inlet without the need for additional pumps or any modifications to the standard chiller.
The temperature stability improvement is dramatic compared to the previous system. The installation of the pipework is simple and efficient, with minimal modification to the original system required. The tank was drained down and a simple tank connector fitted to the existing tank and pipework,which is installed directly to the chiller suction with the return going straight back to the tank.